Wilkinson Trash Chutes6928692
Wilkinson Hi-Rise trash chutes are constructed of #16 gauge aluminized steel, galvanneal and several various grades of stainless steel. Choices for thicker gauge steel are also available. All of our gear carries a one (1) year warranty.
Wilkinson Hi-Rise regular trash chutes are 24” in diameter but can be customized to 18”, 20”, 28”, 30” and 36” options.
Sound dampening coating can be applied to outside of chute to reduce noise emitted by the chute. Further sound protection is supplied by applying a “wrap” insulation to the exterior of the chute. The floor frames of the chute are usually equipped with sound isolator pads at each floor connection point to isolate the chute from the floor of the structure.
The regular trash chute intake door is 15” x 18” bottom hinged hand operated. All doors are self-closing and bottom-hinged on a ½” steel pivot slot to stop debris build-up
A 24” diameter vent will be installed four feet above roof with a metal explosion cap
Floor frames will be fabricated utilizing 1 ½”x1 ½”x three/16” angle steel
½” IPS 165 degree sprinkler head with shield will be installed above the leading intake, and additional sprinklers and shields will be installed at each other intake, as indicated by nearby fire codes.
Optional: To prevent unauthorized use of chute, electric locks (EI), keyed cylinder or card access locks can be added to the intake doors
Optional: Each chute can include a Disinfecting and Sanitizing (D&S) unit with a manually-adjusting valve to regulate amount of disinfectant applied to the interior of the chute.
