Wilkinson Trash Chutes7505724
Wilkinson Hi-Rise trash chutes are constructed of #16 gauge aluminized steel, galvanneal and a number of different grades of stainless steel. Options for thicker gauge steel are also available. All of our gear carries a one (1) year warranty.
Wilkinson Hi-Rise regular trash chutes are 24” in diameter but can be customized to 18”, 20”, 28”, 30” and 36” options.
Sound dampening coating can be applied to outside of chute to minimize noise emitted by the chute. Additional sound protection is supplied by applying a “wrap” insulation to the exterior of the chute. The floor frames of the chute are usually equipped with sound isolator pads at every floor connection point to isolate the chute from the floor of the structure.
The standard trash chute intake door is 15” x 18” bottom hinged hand operated. All doors are self-closing and bottom-hinged on a ½” steel pivot slot to stop debris develop-up
A 24” diameter vent will be installed 4 feet above roof with a metal explosion cap
Floor frames will be fabricated using 1 ½”x1 ½”x 3/16” angle steel
½” IPS 165 degree sprinkler head with shield will be installed above the leading intake, and extra sprinklers and shields will be installed at every other intake, as indicated by nearby fire codes.
Optional: To stop unauthorized use of chute, electric locks (EI), keyed cylinder or card access locks can be added to the intake doors
Optional: Every chute can consist of a Disinfecting and Sanitizing (D&S) unit with a manually-adjusting valve to regulate quantity of disinfectant applied to the interior of the chute.
