Adjusting a Storm Door Closer2439958
Make a easy closer adjustment to keep your storm door from banging shut, or remaining open when you lower or raise the glass panel for winter or summer time.
Adjust your Pneumatic Screen Door Closer
Seasonal adjustment
Make adjustments to your pneumatic screen door closer (storm door closer) twice a year when you exchange the screens and glass storm panels. Move the lengthy connecting pin into the forward hole (for winter) or rear hole (for springtime) of the closer each time you alter the storms or screens. If essential, adjust the stress manage screw on the closer as nicely.
The subsequent time you readjust the screens and glass storm panels in your self-storing combo storm door, do not forget to change the location of the lengthy pin connecting the door bracket with the door closer tube (photo). When the glass storm panels are down, location the connecting pin in the front hole of the closer tube (closest to the door bracket). This increases the closing stress on the door in the last few inches of travel to ensure that the door latch snaps into the catch.
When the screens are down, location the connecting pin in the rear hole of the closer tube (farthest from the door bracket). Now, rather of slamming shut, the door will slow down as it nears the door catch. To improve or decrease the pressure exerted by the door closer, turn the screw controlling the bypass valve in the closer tube. Refer to the instructions on the pneumatic screen door closer label.
