Wilkinson Trash Chutes5381361
Wilkinson Hi-Rise trash chutes are constructed of #16 gauge aluminized steel, galvanneal and several different grades of stainless steel. Options for thicker gauge steel are also accessible. All of our equipment carries a one (1) year warranty.
Wilkinson Hi-Rise standard trash chutes are 24” in diameter but can be customized to 18”, 20”, 28”, 30” and 36” choices.
Sound dampening coating can be applied to outside of chute to reduce noise emitted by the chute. Further sound protection is provided by applying a “wrap” insulation to the exterior of the chute. The floor frames of the chute are typically equipped with sound isolator pads at every floor connection point to isolate the chute from the floor of the structure.
The regular trash chute intake door is 15” x 18” bottom hinged hand operated. All doors are self-closing and bottom-hinged on a ½” steel pivot slot to stop debris develop-up
A 24” diameter vent will be installed four feet above roof with a metal explosion cap
Floor frames will be fabricated using 1 ½”x1 ½”x three/16” angle steel
½” IPS 165 degree sprinkler head with shield will be installed above the leading intake, and extra sprinklers and shields will be installed at each other intake, as indicated by nearby fire codes.
Optional: To stop unauthorized use of chute, electric locks (EI), keyed cylinder or card access locks can be added to the intake doors
Optional: Every chute can consist of a Disinfecting and Sanitizing (D&S) unit with a manually-adjusting valve to regulate quantity of disinfectant applied to the interior of the chute.
